Honda Recalls Rear Brake Reservoir For ST1300

Vehicle Make / Model: Honda / ST1300

Honda / ST1300A
Honda / ST1300PA

Model Year(s): 2008-2010

Manufacture: Honda (American Honda Motor Co.)

Mfr’s Report Date: July 11, 2011

NHTSA Campaign ID Number:11V356000        NHTSA Action Number:N/A

Component: Service Brakes, Hydraulic: Foundation Component:Hoses,Lines/Piping, and Fittings

Potential Number of Units Affected: 2,232

Honda is recalling certain model year 2008 through 2010 ST1300 motorcycles manufactured from Nov. 15, 2007, through may 27, 2010, model year 2008 through 2010 ST1300A motorcycles manufactured from Nov.7, 2007, through April 6, 2010, and model year 2009 ST1300A Police motorcycles, manufactured from Nov. 18, 2008, through Dec. 8, 2009. When the rear suspension of the motorcycle is repeatedly bottomed out (fully compressed) the rear brake reservoir hose mat become damaged and leak fluid.

The rider will experience a loss of rear brake performance or function which increases the risk of a crash.

Dealer will replace the rear brake reservior hose free of charge. The safety recall is expected to begin on or before July 26, 2011. Owners may contact Honda at 1-800-999-1009


Honda safety recall NO. R86. Owners may also contact the National Highway Traffic Safety Administration’s Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to HTTP://WWW.SAFERCAR.GOV

Honda Recalls Bank Angle Sensors

Vehicle Make / Model:      Honda / VT750                                                                          Model Year(s):  2010-2011

Manufacture: Honda (American Honda Motor Co.)                                                        Mfr’s Report Date: Jun 01, 2011

NHTSA Campaign ID Number: 11V310000                                                                        NHTSA Action Number: N/A

Component: Electrical System

Potential Number of Units Affected: 3,020

Honda is recalling certain model year 2010 and 2011 VT705 Motorcycles produced from June 25, 2009, to March 28, 2011, the bank of angle sensor may be incorrectly manfactured created the possibility of an erroneous reading which could cause the engine to stall.

An engine stall, while the motorcycle is being operated, may increase the risk of a crash.

Honda will replace the affected bank angle sensors, the recall is estimated to begin on June 20, 2011. Owners may contact Honda Motorcycle Customer Service at 1-866-784-1870.

Honda’s Safety Recall No. R80 Owners may also contact the National Highway Traffic Safety Administration’s Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to  HTTP://WWW.SAFERCAR.GOV

Will Future Cars “See” Motorcycles Better?

Car companies are heralding the day when the industry produces a “zero fatality” automobile.  That’s right, aside from a meteor falling on you while driving down the expressway, the automobile industry believes that in the next 10 to 20 years, computer simulations and virtual engineering will enable manufacturers to construct cars with a near zero fatality rating.

New technology will provide magnesium and carbon-fiber parts in strategic locations and active safety systems that slow the car as it follows curves in the road, and vehicle-to-vehicle communication that warns you about approaching vehicular, motorcycle, even pedestrian traffic.

Volvo has gone so far to announce that “By 2020, nobody shall be seriously injured or killed in a new Volvo.”

This is great news for motorcyclists, many of who are killed or injured when auto drivers cross into their lane or turn left in their path.

To reach zero fatalaty rating, auto companies are relying on making vehicles that can avoid other vehicles, and in the event of an unforeseeable and unavoidable impact, a vehicle that can crash safer.

Focusing on safer motorcycle crashes  is something motorcycle rights activists have lobbied against for years believing that better auto driver awareness is the key to saving motorcyclists lives.

However, some motorcycle manufacturers have, in the past few years, made improvements in protecting motorcyclists during a crash.

American Honda Motor Co. (which includes Honda and Acura cars, as well as Honda motorcycles, motors and power equipment) has dedicated a lot of money and time to crash analyses with high powered computer model simulations in many different scenarios.

Honda was the first and currently the only motorcycle manufacturer to install air bags on a motorcycle.  The Goldwing air bag is designed to be deployed in the event of  a frontal impact which will slow the operators rate of ejection and th erotically lessen the force of the impact to the operator.

Safety vests, which use compressed gas to instantly inflate upon a rider being ejected from the motorcycle seat have also been marketed and have been successful in several real world accidents.

Automobiles that sense motorcycles and prevent the operator from crossing into the path of the oncoming bike will undoubtedly save many lives, but will have little impact on reducing single vehicle accidents where rider error is the cause, that where safety advocates say additional training is needed.